Young Living’s Desert Mist Ultrasonic Diffuser functions as a humidifier, atomiser, and aroma diffuser in one simple-to-use product. Inspired by the design of a stylish Moroccan trellis, the Desert Mist Diffuser brings an exotic and modern look to any space. It also helps support a natural environment by replacing harmful household fragrance chemicals with naturally derived essential oils.
Using ultrasonic frequency technology, the Desert Mist Diffuser generates waves at 1.7 million per second, breaking down essential oils and water into millions of micro particles, dispersing them into the air, and releasing the oils’ unique constituents. This diffuser is custom designed to diffuse continuously for 5–6 hours on High mode, 8 hours on Low mode, and 10 hours on Intermittent mode.* It also offers 11 individual light settings, including a candle-like flicker mode.
The Desert Mist Diffuser comes with free 5-ml bottles of Lavender and Lemon essential oils.
*Run time may vary based on essential oil type and number of drops used.
Suggested Uses
2. Add room-temperature water until the level reaches but does not exceed the water fill line.
3. Add 8–10 drops of Young Living essential oil.
4. Replace both lids back onto the unit; align the groove on the inner cover to the half circle on the side of the reservoir.
5. Plug the power adapter into a power outlet.
6. Press the Power button to turn the diffuser on (One push = High mode, 2 pushes = Low mode, 3 pushes = Intermittent mode).
7. Press the Light button to cycle through the light modes and colors. Hold down the light button at any time to turn off the light.
- Always turn off and unplug the diffuser prior to cleaning.
- To ensure proper performance, clean the ultrasonic plate and lid after each use.
- If essential oil begins to build up on the ultrasonic plate, gently wipe it off using a cotton swab.
- If essential oil begins to build up on the lid, gently wipe it off using mild soap and water only.
- Never use a corrosive detergent to clean the ultrasonic plate or damage will occur.
- Periodically check under the diffuser to keep the fan intake free of debris.
- Debris can be removed by blowing on the fan intake opening or wiping with a clean, dry cloth. (Do not use aerosol sprays, solvents, or abrasives to clean the plastic housing.)
- When not in use, clean the diffuser and store dry. Replacement ultrasonic plates can be purchased from Young Living.